RF Electronics Engineer
Where
Sign in to see the travel time
In short AI
RF Electronics Engineer role in Open Cosmos's Electronics Team in the Chief Technology Office, designing satellite radios (TT&C, IoT and software-defined radio) for UHF and S-band. Based in Portugal. Applications in English.
Description
a long ad (3 827 characters): the AI summarised it; the full text is in the next tab.
- Role
- Design, simulate, build and test RF circuits for UHF and S-band (LNAs, power amplifiers, filters, matching networks and transceiver front-ends). Turn requirements into manufacturable hardware through schematic capture and PCB layout. Verify and optimise designs in Keysight ADS (or similar). Tune and characterise transceivers for TT&C links and IoT standards (NB-IoT, LoRaWAN). Write and run test plans from prototype through to qualification. Support environmental and EMC test campaigns, including thermal vacuum and vibration. Work with AIT and Production to integrate and debug hardware, and with Systems, Flight Software and Mechanical teams.
- Requirements
- Background in Electronic, RF or Telecommunications Engineering.
- Ability to design, tune and test RF front-ends at UHF and S-band.
- Sound knowledge of RF fundamentals: impedance matching, transmission lines, S-parameters, noise figure, linearity and filtering.
- Testing and debugging RF circuits with a VNA, spectrum analyser and signal generator.
- Experience with RF simulation tools (Keysight ADS or AWR Microwave Office).
- Schematic capture and PCB layout in Altium Designer (or similar), with attention to RF layout, grounding and shielding.
- Understanding of analogue and digital design, EMC and noise reduction.
- Preferred
- basic MCU firmware skills (C), SPI, I2C, UART and CAN, TT&C protocols, IoT standards (NB-IoT, LoRaWAN), link budgets and design-for-space principles.
- Conditions
- Contract: not stated
- Salary: not stated
- Hours: not stated
- Location: Portugal (address not stated)
- Benefits
- none stated
Aim high, go beyond!
At Open Cosmos we are solving the world’s biggest challenges from space, providing businesses, governments and researchers access to more readily available information than ever before - ready for the challenge? Then read on…
Working in our Chief Technology Office (CTO)
The CTO division is where Open Cosmos technology comes to life. Covering engineering, product development, and technical innovation, the team designs, builds, and operates the satellites, systems, and platforms that make our missions possible. It’s a highly collaborative environment where ideas become real hardware, software, and data solutions that deliver impact from space.
We're looking for an RF Electronics Engineer to join our Electronics Team and help design the radios that fly on our satellites. You'll work across TT&C links, IoT payloads and software-defined radio hardware, taking designs from the first schematic all the way to a satellite on the launch pad. If you love getting hands-on with a VNA, enjoy seeing your boards go from simulation to flight, and want to grow fast in a team that builds real space hardware, we'd love to hear from you.
What you'll do
Design, simulate, build and test RF circuits for UHF and S-band, including LNAs, power amplifiers, filters, matching networks and transceiver front-ends.
Turn requirements into manufacturable RF hardware through schematic capture and PCB layout.
Use Keysight ADS (or similar) to verify and optimise designs before they're built.
Tune and characterise transceivers for TT&C links and IoT standards such as NB-IoT and LoRaWAN.
Write and run test plans from prototype through to qualification, and measure performance in the lab.
Support environmental and EMC test campaigns, including thermal vacuum and vibration.
Work side by side with AIT and Production to integrate, test and debug hardware.
Keep clear documentation and feed what you learn in test back into the next design.
Collaborate with Systems, Flight Software and Mechanical teams so your designs fit the mission.
Bring ideas to the table for our next generation of RF and communication systems.
What you'll bring
A background in Electronic, RF or Telecommunications Engineering.
The ability to design, tune and test RF front-ends at UHF and S-band.
Sound knowledge of RF fundamentals: impedance matching, transmission lines, S-parameters, noise figure, linearity and filtering.
Confidence testing and debugging RF circuits with a VNA, spectrum analyser and signal generator.
Experience using RF simulation tools such as Keysight ADS or AWR Microwave Office.
Schematic capture and PCB layout skills in Altium Designer (or similar), with an eye for RF layout, grounding and shielding.
An understanding of analogue and digital design, EMC and noise reduction.
Basic MCU firmware skills (C) and familiarity with SPI, I2C, UART and CAN.
Awareness of TT&C protocols, IoT standards (NB-IoT, LoRaWAN), link budgets and design-for-space principles.
A curious, collaborative mindset: you ask good questions, take feedback well and enjoy learning fast.
This role will be based in Portugal. To apply, you must have the legal right to work here.
Please submit your application and CV in English.
Why Open Cosmos?
Work at the cutting edge of space technology with customers around the globe
A mission-driven company making space accessible to help solve real-world challenges
A diverse, ambitious, and supportive team
Equal opportunity employer
At Open Cosmos, we are dedicated to fostering a workplace built on respect, dignity, and belonging. As an equal opportunity employer, we actively challenge bias to ensure every candidate and employee feels truly welcome. We celebrate diversity in all its forms and are committed to maintaining an inclusive environment where everyone has the opportunity to thrive.
How to apply
Application and CV in English. Candidates must have the legal right to work in Portugal. AI
Prepare your application
A cover letter and a short pitch for this job, written from your profile, and what to learn next.
Sign in and create your profile from your CV. It is private: we share it with no one.
Something wrong or unlawful in this ad? Report it
Similar jobs
- Senior RF Electronics EngineerOpen Cosmos · Coimbra,Porto
- FPGA EngineerOpen Cosmos · Porto
- RF Communications Engineer | Electronics TeamTEKEVER · Caldas da Rainha
- Thermal Systems EngineerOpen Cosmos · Coimbra,Porto
- Senior Optical Design EngineerOpen Cosmos · Coimbra,Porto
- Mission Concept EngineerOpen Cosmos · Porto
Salary compared ⓘ
20 jobs · Telecommunications engineers · Portugal
see the best paid →Training for this job
- AI+ Telecommunications Practitioner™Rumosself-paced · 40 h · 695 €Useful for this occupation: Telecommunications engineers
- Comunicar em Inglês e Interagir no Contexto ProfissionalServiço de Formação Profissional de Viana do Casteloonline · daytime · 200 h · free · starts 04/12/2026Asked for in this ad: English
Languages AI
Published on (1)
- Open Cosmos seen 16 Nov – 21 Nov
Where the company is see on the map →
- Porto (Porto) ≈ 32 jobs · 1 on the company's website (office) · OSM · Google Maps
- Coimbra (Coimbra) ≈ 13 jobs · 1 on the company's website (office) · OSM · Google Maps
according to the company's other jobs, the addresses on the company's website; not necessarily where this job is. ≈ approximate point (only the locality or the postcode is known).
First seen on 16 Nov, 21:30 · last seen on 21 Nov, 21:56