cores
radaremprego

RF Electronics Engineer

Horáriosem indicação no anúncio
não indicado no anúncioregime · contrato · salário
publicado 2026-11-16

Onde

Coimbra (Coimbra), Porto (Porto)

melhorar localização

Entra para ver o tempo de viagem

Renda mediana ⓘ
Coimbra
T1470 €T2710 €
Porto
T1720 €T21 090 €

Em resumo IA

Engenheiro(a) de eletrónica RF para a equipa de Eletrónica da Chief Technology Office da Open Cosmos, para projetar rádios de satélites (TT&C, IoT e rádio definido por software) em UHF e banda S. Função baseada em Portugal. Candidatura em inglês.

Descrição

anúncio longo (3 827 caracteres): a IA resumiu-o; o texto integral está no separador ao lado.

Função
Projetar, simular, construir e testar circuitos RF para UHF e banda S (LNAs, amplificadores de potência, filtros, redes de adaptação e front-ends de transceptores). Traduzir requisitos em hardware fabricável através de captura de esquemático e layout de PCB. Verificar e otimizar projetos no Keysight ADS (ou similar). Afinar e caracterizar transceptores para ligações TT&C e normas IoT (NB-IoT, LoRaWAN). Escrever e executar planos de teste desde o protótipo até à qualificação. Apoiar campanhas de ensaios ambientais e de EMC, incluindo vácuo térmico e vibração. Trabalhar com AIT e Produção na integração e depuração do hardware, e com as equipas de Sistemas, Software de Voo e Mecânica.
Requisitos
  • Formação em Engenharia Eletrónica, RF ou Telecomunicações.
  • Capacidade de projetar, afinar e testar front-ends RF em UHF e banda S.
  • Conhecimentos sólidos de RF: adaptação de impedância, linhas de transmissão, parâmetros S, figura de ruído, linearidade e filtragem.
  • Testes e depuração de circuitos RF com VNA, analisador de espectro e gerador de sinais.
  • Experiência com ferramentas de simulação RF (Keysight ADS ou AWR Microwave Office).
  • Captura de esquemáticos e layout de PCB em Altium Designer (ou similar), com atenção a layout RF, massas e blindagem.
  • Conhecimentos de projeto analógico e digital, EMC e redução de ruído.
Valorizado
  • competências básicas de firmware em MCU (C), SPI, I2C, UART e CAN, protocolos TT&C, normas IoT (NB-IoT, LoRaWAN), cálculo de orçamento de ligação e princípios de design para espaço.
Condições
Contrato: não indicado
Salário: não indicado
Horário: não indicado
Local: Portugal (morada não indicada)
Benefícios
não indicados

Aim high, go beyond!

At Open Cosmos we are solving the world’s biggest challenges from space, providing businesses, governments and researchers access to more readily available information than ever before - ready for the challenge? Then read on…

Working in our Chief Technology Office (CTO)

The CTO division is where Open Cosmos technology comes to life. Covering engineering, product development, and technical innovation, the team designs, builds, and operates the satellites, systems, and platforms that make our missions possible. It’s a highly collaborative environment where ideas become real hardware, software, and data solutions that deliver impact from space.

We're looking for an RF Electronics Engineer to join our Electronics Team and help design the radios that fly on our satellites. You'll work across TT&C links, IoT payloads and software-defined radio hardware, taking designs from the first schematic all the way to a satellite on the launch pad. If you love getting hands-on with a VNA, enjoy seeing your boards go from simulation to flight, and want to grow fast in a team that builds real space hardware, we'd love to hear from you.

What you'll do

  • Design, simulate, build and test RF circuits for UHF and S-band, including LNAs, power amplifiers, filters, matching networks and transceiver front-ends.

  • Turn requirements into manufacturable RF hardware through schematic capture and PCB layout.

  • Use Keysight ADS (or similar) to verify and optimise designs before they're built.

  • Tune and characterise transceivers for TT&C links and IoT standards such as NB-IoT and LoRaWAN.

  • Write and run test plans from prototype through to qualification, and measure performance in the lab.

  • Support environmental and EMC test campaigns, including thermal vacuum and vibration.

  • Work side by side with AIT and Production to integrate, test and debug hardware.

  • Keep clear documentation and feed what you learn in test back into the next design.

  • Collaborate with Systems, Flight Software and Mechanical teams so your designs fit the mission.

  • Bring ideas to the table for our next generation of RF and communication systems.

What you'll bring

  • A background in Electronic, RF or Telecommunications Engineering.

  • The ability to design, tune and test RF front-ends at UHF and S-band.

  • Sound knowledge of RF fundamentals: impedance matching, transmission lines, S-parameters, noise figure, linearity and filtering.

  • Confidence testing and debugging RF circuits with a VNA, spectrum analyser and signal generator.

  • Experience using RF simulation tools such as Keysight ADS or AWR Microwave Office.

  • Schematic capture and PCB layout skills in Altium Designer (or similar), with an eye for RF layout, grounding and shielding.

  • An understanding of analogue and digital design, EMC and noise reduction.

  • Basic MCU firmware skills (C) and familiarity with SPI, I2C, UART and CAN.

  • Awareness of TT&C protocols, IoT standards (NB-IoT, LoRaWAN), link budgets and design-for-space principles.

  • A curious, collaborative mindset: you ask good questions, take feedback well and enjoy learning fast.

This role will be based in Portugal. To apply, you must have the legal right to work here.

Please submit your application and CV in English.

Why Open Cosmos?

  • Work at the cutting edge of space technology with customers around the globe

  • A mission-driven company making space accessible to help solve real-world challenges

  • A diverse, ambitious, and supportive team

Equal opportunity employer

At Open Cosmos, we are dedicated to fostering a workplace built on respect, dignity, and belonging. As an equal opportunity employer, we actively challenge bias to ensure every candidate and employee feels truly welcome. We celebrate diversity in all its forms and are committed to maintaining an inclusive environment where everyone has the opportunity to thrive.

Como me candidatar

Candidatura e CV em inglês. É necessário ter o direito legal de trabalhar em Portugal. IA

Candidatar no anúncio original ↗

Preparar candidatura

Uma carta de apresentação e uma apresentação curta para esta oferta, escritas a partir do teu perfil, e o que aprender a seguir.

Entra e cria o teu perfil a partir do CV. É privado: não o partilhamos com ninguém.

Algo errado ou ilegal neste anúncio? Reportar

Fica visível enquanto analisamos. Decidimos em até 7 dias (o que é claramente ilegal, como uma burla, mais depressa) e dizemos-te o resultado e porquê.

Ofertas semelhantes

Salário comparado ⓘ

Salário propostoMediana?1 715 €
1 345 €1 950 €

20 ofertas · Engenheiros de telecomunicações · Portugal

ver as que pagam mais →

Formação para esta vaga

Requisitos IA

  • Engenharia Eletrónica, RF ou Telecomunicações
  • Experiência com VNA e analisador de espetro
  • Keysight ADS ou AWR Microwave Office
  • Direito legal de trabalho em Portugal

Idiomas IA

Publicado em (1)

Onde a empresa está ver no mapa →

segundo outras ofertas da empresa, as moradas no site da empresa; não é necessariamente o local desta oferta. ≈ ponto aproximado (só a localidade ou o código postal são conhecidos).

Vista pela primeira vez a 16 nov, 21:30 · última vez a 19 nov, 21:26